Measuring a Spindle on a 1988 Long Chih Trailer LCI-851T to Determine the Correct Bearings
Question:
Hi, I need a trailer bearing kit 4 bearings/races and 2 seals for my Long Chih fold-up Fred Meyer red trailer 1988. I looked at your Long Chih info and saw that the kits mentioned were ~1.980inch ODs, my ODs are ~2.045. If you have a kit for this please let me know. Seal no.s: 579 VB2 31 52 7 4 SDA ~2.0+inch OD x ~1.0inch ID Bearings: Japan WT NTN 30205 I ordered a kit from Northern awhile back but the bearings were roughly .050inch too small in the OD. 1.980inch vs. 2.045.
asked by: Dave R
Expert Reply:
The part numbers you have provided do not cross reference to anything we have, which does happen. It doesn't mean that we don't have anything that will fit. It just means that we have to determine all the parts you will need, if available, a different way.
You will need to take very accurate measurements of the spindle to determine the correct replacement parts. The measurements have to be taken using a set of dial or digital calipers. I have included a picture that shows where to take the measurements.
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Q&A: How To Determine Bearings and Seals For Older Long Chih Trailer
- Q&A: Replacement Parts for Long Chih Industrial LCI-850T Folding Utility Trailer
- Article: Most Popular Wheel Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: bearing buddy
- Search Results: lug nut
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer jack
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Grease Seals 10-36 (pair)
- Search Results: lug nuts
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Roof Rack
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)