Where to Mount the Derale Dual-Pass Heat Sink Transmission Cooler and How Does It Compare
Question:
How does the D13266 compare with traditional High effecency transmission coolers? And if I decide to buy this pecticular cooler instead of the traditional design where would you suggest installing it on a 2004 towncar. I was considering in the front so it is directly in the airflow.
asked by: Dennis K
Expert Reply:
The heat sink coolers like the Derale Dual-Pass Heat Sink Transmission Cooler, item # D13266, do not perform nearly as well as the traditional style coolers. These coolers have a single large cavity and do not force the liquid through a number of small cavities as a tube or plate and fin style cooler would. In comparison the heat sink style would not perform as well as the smallest plate and fin style transmission cooler.
For your Town Car I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/ Hose Barb Inlets, item # D13501, which would cool a great deal more than the heat sink style of cooler and is not very large so there should be plenty of room to install the cooler in front of the A/C condenser.
Products Referenced in This Question
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class II - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Small SUV
- Standard Mount
- 11W x 5-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Product Page this Question was Asked From
Derale 26" Dual-Pass Heat Sink Transmission Cooler with Installation Kit
- Transmission Coolers
- Frame Rail Cooler
- Frame Mount
- 26-1/4L x 2-3/16W x 3-1/4T Inch
- Dual-Pass
- With 1/4 Inch NPT
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Stability Control for Heavy Duty Vehicles
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Transmission Cooler
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Determining Trailer Tongue Weight
- Q&A: Choosing Between Air Lift Load Lifter 5000 or 7500 For 2018 Ram 2500 Towing 5th Wheel
- Q&A: What is the Difference between Timbrens and SumoSprings for My 2022 Ram 1500 4x4?
- Q&A: Recommended Suspension Enhancement for a 2024 GMC Canyon Pulling a Trailer