Shoreline Boat Trailer Wobble Roller Recommendation
Question:
We have a Shoreline boat trailer that dates back to late 1980s 87 to 90? and we need to find replacement inside pieces for the rollers which are still in good condition. There are 32 rollers on this model. The name and model on the roller is Yates 53OR. As I said, we dont need the entire roller assembly. We only need the plastic ? pieces that go inside the rollers to go over the arms that they roll on. Thank you for your help!
asked by: Jack K
Expert Reply:
Looks like you have the Yates Ribbed Wobble Rollers part # YR530R-6P installed on your Shoreline boat trailer. We do not carry any pieces that are internal of the roller like a bushing if that is what you are referring to.
We carry the retainer rings part # CE10981 and the wobble roller washers part # CE10983, but if you need a different part of the wobble roller replaced you will have to go ahead and replace the entire roller.
Products Referenced in This Question
CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1
- Accessories and Parts
- Boat Trailer Parts
- Hardware
- Retaining Ring
- CE Smith
more information >
CE Smith Wobble Roller Washer for 3/4" Shaft - Zinc-Plated Steel - Qty 1
- Accessories and Parts
- Boat Trailer Parts
- Trailer Hitch
- Trailer Suspension Parts
- Weight Distribution Hitch
- Hardware
- 3/4 Inch Diameter
- Washers
- CE Smith
more information >
Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 3/4" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Black Rubber
- Fits 3/4 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 4-3/8" Diameter - 3/4" Shaft
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: 13390
- Search Results: 13301
- Search Results: gnrk1020
- Shop: Curt RV Bumper Hitch - 2"
- Search Results: 51110
- Search Results: 51140
- Search Results: 56333
- Search Results: 7 round
- Shop: Vehicle Tow Bar Wiring
- Q&A: What Air Pressure Should I Run in My Trailer Tires?
- Video: Redline Dust Cap Driver Tool Review
- Q&A: Replacement for a Bargman L100 Airstream 1967
- Shop: Fifth Wheel Hitch
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR530R-6P Review
- Q&A: Hub Length of 4" - 3/4" Shaft CE Smith Ribbed Wobble Roller for Boat Trailers
- Q&A: Replacement Bearings for a 1982 Shoreline Trailer
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE29536
- Video: Review of Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR343R-6P
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR500YW-6P Review
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR440R Review