Affordable High Quality Trailer Hitch and Wiring for a 2006 Lexus IS 250 to Carry a KX65 Dirt Bike
Question:
I am trying to find a set-up to get my sons KX65 dirtbike around with my car. It weighs 132lbs and is for a 2006 Lexus IS 250. I have found a class I hitch receiver for my car, but need to find some trailer or similar to get his dirtbike around. Is this possible?
asked by: Heather
Expert Reply:
It is possible but the only way to safely carry the bike around with your 2006 Lexus IS 250 is to tow it on a trailer. None of the hitch mounted carriers will work with a Class I trailer hitch such as # C11372. I recommend you put your son's bike on a trailer.
In addition to the hitch you will also need the recommended ball mount # C45521 and a properly sized ball to match the coupler on the trailer. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. And for trailer wiring you can use # C59236. You also need a pin and clip # F-4. I have included links to instructions for the hitch and wiring to the right.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Receiver & Towing Set Up For Lexus 2006 IS 250
- Q&A: Does Curt Hitch 11372 Require Drilling to Install on a 2007-2010 Lexus GS350
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Curt Hitch # C11366 Fit 2015 Lexus GS 350 F Sport
- Q&A: Curt Trailer Hitch is Very Close to Ground on a 2015 Lexus IS 350 F-Sport
- Q&A: Replacement For Shelby 5135 Coupler With 3 Channel
- Q&A: How do Determine Ground Clearance for Curt Class I Trailer Hitch # C11372 on a 2008 Lexus IS 350
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Measure for Trailer Hitch Drop
- Article: Tips on How To Tow a Trailer
- Article: My Trailer Hitch Doesn't Fit