Does Rhino-Rack Roof Rack RR78MR Come with Everything Needed for 2012 Ford Focus Hatchback

Question

Question:

I wasnt sure if this product included everything I needed for install? 2012 ford focus 5dr hatchback, no gutter, bare roof.

asked by: Christina

0

Expert Reply:

Rhino-Rack ROC25 Roof Rack # RR78MR includes everything needed to install a roof rack on your 2012 Ford Focus 5-door hatch back with a naked roof. You will not need to purchase any additional parts. It comes with everything.

expert reply by: Michael H

0

Answer 1

The best length fairing will be the one that fits between the feet of the roof rack without going over. While your #RRRF2 may look too short at first glance with your Rhino Rack roof rack part #RR78MR it should still work really well. The next size…

view full answer...

Answer 2

You would need to use the Allen key to remove the Rhino-Rack roof rack #RR78MR every time. But it isn't as difficult or time-consuming as it sounds. After you have done the initial installation and have taken the rack off and put it back on a…

view full answer...

Answer 3

The Rhino-Rack ROC25 Roof Rack #RR78MR is a fit for your 2016 Ford Focus Hatchback. The Rhino-Rack Roof Rack #RR68MR is a fit for the sedan version of your vehicle. This is a really nice looking roof rack and I like that it comes with locks. Yes the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 12

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...