Is the Curt Trailer Hitch # C11396 Compatible with the 2013 Leaf S Model
Question:
RE: Curt # C11396 .... And Will this part also work for a 2013 Nissan Leaf model S yes/no?
asked by: Adrian
Expert Reply:
My contact at Curt tells me Curt hitch # C11396 is a fit for all models of the 2013 Nissan Leaf, including the S model.
If you want to do some light duty towing you will want the following parts:
The recommended ball mount for this hitch is # C45520.
The recommended pin and clip is # F-4.
The recommended 1-7/8" hitch ball is # C40001.
The recommended 2" hitch ball is # C40018.
As long as your trailer weight doesn't exceed the rated towing capacity of your Leaf, or the 1500-pounds maximum rating for a Class I hitch, then you can tow with your Leaf. You will want to consult your owner's manual to make sure that the Leaf is rated for towing.
I have included a link to the installation instructions for this hitch.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 150 lbs TW
- 1500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Carry Bike Rack for 2 Inch Receiver on a 1-1/4 Inch Hitch
- Article: Trailer Hitch Installation Tips
- Q&A: Gooseneck Ball To 5TH Wheel Hitch Adapter For Flat Bed Truck
- Q&A: Trailer Hitch and Wiring Harness Recommendation for 2019 Nissan Leaf
- Q&A: Recommended Trailer Hitch with Hidden Crossbar for 2017 Acura RDX
- Q&A: Single Crossbar To Use With Trailer Hitch Mount To Carry A Canoe
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Determining Trailer Tongue Weight
- Article: Trailer Hitch Receiver Sizes