Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump Bed
Question:
good morning i have a 95 ford f350 7.3l im looking for a class 5 hitch, the frame is 34inch with flat bed dump
asked by: Joe B
Expert Reply:
Based on the size of your frame, it sounds as though your 1995 Ford F350 is the Cab and Chassis style. Curt offers a Class IV Receiver Hitch, # C14082, that with bolt directly to your vehicle's frame with no welding required. This hitch has a 1000 pound tongue weight capacity and 10000 pound towing capacity.
We do not offer a custom Class V hitch for your truck but universal Class V hitch receivers are available. Curt offers the Universal Weld-On Receiver, # 15901, with 3 inch drop and the # 15902 with 10.865 inch drop. The side brackets must be welded onto the hitch and onto the vehicle's frame. Both hitch receivers will fit frames up to 43 inches wide.
The hitch receivers that I have mentioned have not been tested on a 1995 Ford F350 with a dump bed so you will want to take a look at the installation instructions and your truck to make sure that there won't be any interference with the mounting location or the operation of the dump bed once the hitch is installed.
If your truck isn't equipped with a 4 way trailer connector, Tow Ready offers the Custom Fit T-One Vehicle Wiring Harness, # 118316, for your Ford F350. The T-One connector plugs directly into the existing wiring with no cutting or splicing required.
To complete the towing package, we offer Ball Mount Kit # EBMK2416 which comes with a handy carrying bag to keep everything together. This kit includes ball mount with 3" rise or 4" drop, 2 inch hitch ball, 2-5/16 inch hitch ball, pin and clip, and etrailer.com ball mount bag.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop
- Heavy Duty Receiver Hitch
- Weld-On
- 18 - 44 Inch Wide
- 1500 lbs TW
- 15000 lbs GTW
- Class V
- 2 Inch Hitch
- 3 Inch Drop
- CURT
more information >
Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
- Heavy Duty Receiver Hitch
- Weld-On
- 18 - 44 Inch Wide
- 1200 lbs TW
- 12000 lbs GTW
- Class V
- 2 Inch Hitch
- CURT
more information >
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Class IV
- Draw-Tite
more information >
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
etrailer Ball Mount Kit - 3" Rise or 4" Drop - 16,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Class IV
- Ball Mount Kit
- etrailer
more information >
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Covers and Storage
- Bag
- etrailer
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Side Plate and Bolt Hole Spacing Measurements for Curt Trailer Hitch # C14082
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Bolt Hole Spacing of Curt Class IV Hitch Receiver 14082
- Q&A: Curt Trailer Hitch Receiver # C14082 Tube Height From Mounting Flange For 1973 Ford F-100
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Is There a Hitch Available for a 1986 Chevy CUCV M1008 Military Truck on a Chevy C/K Platform
- Q&A: Distance from Mounting Bracket to Top of Receiver on Curt Trailer Hitch # C14082
- Q&A: Dimensions of Hitch Opening of Curt Hitch #13028
- Q&A: Which Curt Trailer Hitch is a Fit for 34 inch Wide Trailer Frame
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Types of Bumpers