Is a Pullrite Superglide Compatible with Trailair Roto Flex Pin Box

Question

Question:

Can I use a pullrite super glide Fifth wheel hitch when using a Trailair roto flex pinbox?? And which adapter plate I would use? Thank you,

asked by: Richard W

0

Expert Reply:

Yes, I did some checking and the Trailair Roto Flex Pin Box is compatible with PullRite Super Glide hitches. We do not carry the adapter plate needed but it is part number PR_331756.

expert reply by: Jameson C

0

Answer 1

According to PullRite you will need to measure from the front edge of your king pin to the leading edge of the king pin plate to verify which capture plate to use with your Rota-Flex 5th Wheel Pin Box, like part #LC328329. If that measures…

view full answer...

Answer 2

The noise you described would be from the pivot point of the Rota-Flex. I spoke with my contact at Lippert and he said that typically when the noise you described is heard it is because there is a gooseneck adapter on the pin box which…

view full answer...

Answer 3

Yes, the Trailair Rota-Flex 5th Wheel Pin Box #LC328330 can be used with a Pullrite SuperGlide 5th wheel hitch. This particular model is designed to replace a Lippert 1621 or 1621HD 5th-wheel pin box, so if that's what you have it would work…

view full answer...

Answer 4

The cushion block on the Trailair Rota-Flex 5th Wheel Pin Box #LC328330 is not a replaceable part so I would first reach out to Lippert directly to see if this would qualify for a warranty replacement. If not you'd be looking at replacing…

view full answer...

Answer 5

The thing that causes the noise you are experiencing is actually the hitch you have and not the Roto Flex. The biggest factor in how much noise you'll experience when towing a fifth wheel trailer is the hitch itself since it has moving parts and…

view full answer...

Answer 6

I went out to our warehouse to measure the Trailair Rota-Flex Pin Box, #LC328330, and found that the width is 12 inches. When measuring the length of a pin box, you want to find the distance from the center of the king pin to the bolt holes. The…

view full answer...

Answer 7

Capture plates are designed to be used with auto slide hitches like the Demco Highjacker #DM8550034 or the PullRite Auto Slide hitches. As the B&W Companion #BWRVK3305 is a fixed fifth wheel hitch, you do not need a capture plate. If you are…

view full answer...

Answer 8

The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider #DM8550024 should not be able to be manually turned. The movement of the hitch head side to side is only possible when the weight of the trailer is on the hitch head. The reason for this is so…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Is a Pullrite Superglide Compatible with Trailair Roto Flex Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching