Does Trailer Hub Assembly for 2,000 Pound Axles Include Bearings and What Spindle Will Fit
Question:
Does trailer hub AKIHUB-440-2-1K come with the bearing assy? Which spindle goes/matches this particular hub, is their a part no?
asked by: Ellis S
Expert Reply:
The inner and outer bearings, races, seals and cap are all included. We carry three spindles that will fit this hub. The differences is the shanks that are to be welded to the axle, but the machined portions will fit the hub assembly you were looking at.
The spindles are part # TRU94FR, part # TRU59FR, and part # TRU97FR.
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Q&A: Do Trailer Spindles Just Weld to End of Axle
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU97FR
- Search Results: trailer spindles
- Search Results: stake pocket
- Search Results: stake pocket mount
- Shop: CE Smith Stake Pocket for Flatbed Truck or Trailer - Galvanized Steel - Bolt On - Qty 1
- Shop: MB Sturgis Propane Hose - 3/8" Female Flare Swivel x 3/8" Female Flare Swivel - 2'
- Shop: Propane Hose - 3/8" Female SAE Flare Swivel x 3/8" Female SAE Flare Swivel
- Shop: Propane Hose - 3/8" Female SAE Flare Swivel x 3/8" Female SAE Flare Swivel - 2'
- Shop: Trailer Weld-on Stake Pocket - 7 Gauge
- Q&A: Bearing Kit Replacement for BT-100 Trailer Hub
- Search Results: 4 lug axle
- Q&A: Recommended Bearing Buddy Grease Cap & Seal for Boat Trailer Using Dexter Hub 34822BX
- Q&A: Trailer Hub For BT8 Spindle With 4 on 4 Bolt Pattern For Boat Trailer
- Q&A: Replacement Hubs with 4 on 4 Bolt Pattern for 1" Non-Tapered Spindle on Boat Trailer with 12" Wheels
- Q&A: Replacement Trailer Spindle that Takes L44643 Bearings
- Q&A: 4 On 4" Lug Pattern Idler Hubs Galvanized That Use L44643 Bearings For 2,000LB Boat Trailer Axle
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Article: How to Choose the Right Trailer Hitch Class