Will the Kodiak Disc Brake Kit # K2HR2D Fit an EZ Loader Trailer with 2,500 lb Axles 12 Inch Wheels
Question:
I have a ez loader boat trailer with 2500 lb axels and 12 wheels .will these work on my trailer? will thay fit inside my wheels?
asked by: James E
Expert Reply:
There are a few additional factors to consider other than the wheel size before determining if the Kodiak Disc Brake Kit, # K2HR2D, will fit on your trailer. According to Kodiak, this kit was designed to fit 10 inch to 13 inch wheels, so they will work with 12 inch wheels as long as the wheels have a 5 on 4-1/2 inch bolt pattern. I have attached a help article on how to determine your bolt pattern if you do not know your bolt pattern.
The best way to make sure this brake kit will be compatible with your trailer, is to match the bearing and grease part numbers. The trailer manufacturer can give you this information using your VIN or serial number, but you can also find the part numbers stamped into the bearings and seals themselves (see photo). A hub will need to be removed to access the bearings, but once we know what bearings your trailer spindles use, we can choose the correct kit.
The kit you are looking at was designed for 2,000 lb axles. Since you have 2,500 lb axles, they may require different bearings. If you can tell me those part numbers, then I can recommend the correct disc brake kit for you.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 2000 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: How To Confirm Fit of Kodiak Disc Brake Kit
- Q&A: Does Brake Caliper Mounting Flange Need to be Modified to Install Kodiak Disc Brake Kit # K2HR2D
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Search Results: weld on hinge
- Search Results: weld hinge
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 2,000 lbs - E-Z Lube
- Q&A: What Bearings Are Used in the Kodiak Disc Brake Kits for 2000-lbs and 3500-lbs Axles
- Q&A: How to Determine Fit of Disc Brakes for Trailer With 2,000 lb Axle and 7 Inch Drum Brakes
- Search Results: brake line kit
- Q&A: Can the Calipers of the Kodiak Disc Brake Kit K2HR2D Mount in 12:00 Position
- Q&A: Do Disc Brake Hubs Stick Out Further than Drum Brake Hubs
- Search Results: kodiak oil bath hub kit
- Q&A: Replacement Disc Brake Kit for 2014 EZ Loader Boat Trailer
- Shop: Trailer Hitch
- Video: Aries AdvantEdge Headache Rack Review
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Video: Brake Buddy Classic 3 Portable Supplemental Braking System Installation - 2009 Jeep Wrangler Unlimit
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Search Results: 25580
on Accessories and Parts
