Correct 7-Way Mounting Bracket for the Nissan Tow Package Wiring Harness # 118266

Question

Question:

Problem with item #118138. I thought everything was going together as directed until I got to the point of installing my 7 way connector to the wiring mounting bracket only to find that the hole pattern in the bracket does not fit the 7 way connector. The way that it is I can only put one screw through the connector and the bracket. There seems to be no way to make it work without drilling new holes in the connector. What is the fix?

asked by: John T

1

Helpful Expert Reply:

The Draw-Tite 7-Way Mounting Bracket, # 18138, will not fit the Nissan Tow Package Wiring Harness, # 118266, that you purchased. The correct mounting bracket is the Pollack 7-Pole Mounting Bracket, # PK12711U. This bracket is listed in the related items on the product page for the Nissan wiring harness. You will also want the installation hardware, # PK11926, unless you plan on using the hardware from the Draw-Tite bracket.

expert reply by: John H

1

Answer 1

First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part #PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 8

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 9

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 10

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 11

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Answer 12

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Correct 7-Way Mounting Bracket for the Nissan Tow Package Wiring Harness # 118266

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching