Does 1/4 Inch Diameter Snapper Pin Come in Stainless Steel

Question

Question:

HI, DO YOU CARRY THIS PRODUCT IN STAINLESS STEEL? Snapper Pin, 1/4inch x 1-3/4inch - Square

asked by: Gene M

1

Helpful Expert Reply:

The 1/4 inch diameter snapper pins we carry are all regular steel. For a stainless steel 1/4 inch diameter pin I recommend locking pin # 2847DAT. I have included a link to a video review for you. You will get the stainless steel construction you are after plus the added security of a lock.

expert reply by: Chris O

1

Answer 1

Thanks for reaching out! From the hitch pin hole to the back end of the height adjusting bracket on the Curt Slim Adjustable 2-Ball Channel Mount - 2" Hitch #C46KR measures about 5-3/4" and then from that same hitch pin hole to the start of…

view full answer...

Answer 2

The Curt Slim Adjustable 2-Ball Channel Mount #C46KR has a 5/8" pin that holds the ball to the adjustable rail. The rail itself is 2" wide. I recommend the Curt Lock Set #C23556 as being a lockset for their ball mount. It will give you both…

view full answer...

Answer 3

The Curt Slim Adjustable 2-Ball Channel Mount #C46KR you were looking at is adjustable in 1" increments so you will absolutely be able to use it in a 1" drop position. This ball mount will give you plenty of adjustability for getting your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

view full answer...

Answer 11

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

view full answer...

Does 1/4 Inch Diameter Snapper Pin Come in Stainless Steel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching