Can Ultra-Fab Ultra Scissor Jack # UF48-979006 Be Used in Multiples to Level a Trailer

Question

Question:

Could a set of these jacks, mounted to the frame, one in front and one behind the tandem tires, be used for leveling??

asked by: Kp

1

Helpful Expert Reply:

Yes, the Ultra-Fab Ultra Scissor Jack # UF48-979006 that you referenced can be used in multiples to level and stabilize a trailer. This jack welds or bolts (with hardware you supply) on to your trailer or RV frame. As long as these jacks' 6,500-lb capacity is adequate for your trailer or RV you can use a set as you describe.

Please note that these jacks are designed to stabilize, but not to support the full weight of a trailer.

expert reply by: Adam R

1

Answer 1

The problem that you are running into is that scissor jacks for trailers, such as #UF48-979006, are not meant to lift up the trailer. They are for stabilizing the trailer front to back or side to side only. I know that seems counter-intuitive but…

view full answer...

Answer 2

The Ultra-Fab Scissor Jack #UF48-979006 that you referenced is strictly designed as a stabilization mechanism for trailers only. This jack mounts to the underside of the trailer and then drops to hold the trailer in place to prevent rocking. My…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

We have just what you need, the Go Power Portable Solar Panel with Digital Solar Controller, #34282610. This lets you place the solar panel where you need it for maximum sunlight while not having to place the camper in the sun too. For the later…

view full answer...

Answer 5

If you look at the photo I edited for you, you will be able to see all the dimensions of the mounting tabs on the top of the Ultra-Fab #UF48-979006 Scissor Jack.

view full answer...

Answer 6

We do not have any hub caps that fit trailer wheels. If you were wanting to go with something nicer looking you'd need to replace the wheel with something like the Westlake ST205/75-14 part #WST57FR or any of the other aluminum wheel options at…

view full answer...

Answer 7

Yes, the Ultra-Fab Ultra Scissor Jack #UF48-979006 will work as a replacement for your damaged stabilizer on your 2019 Keystone Hideout 274LHS. This jack has a universal style bolt mounting plate and an oversized footplate to prevent it from sinking…

view full answer...

Answer 8

For some unknown reason stabilizer manufacturers love to just make each stabilizer's mounting holes slightly different than the rest. While we don't have an exact match to the dimensions you stated you luckily can still use almost any other…

view full answer...

Answer 9

Both of the ARK stabilizer jacks #ARK94FR and #ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the #ARK94FR has a square tube and #ARK87FR has a round tube. These are both going be…

view full answer...

Answer 10

I went out to the warehouse and pulled an Ultra-Fab Ultra Scissor Jack, #UF48-979006, to take some measurements for you. The overall length of the jack when fully retracted is 26 inches, so from the middle to either side it would be 13 inches. I also…

view full answer...

Answer 11

For your 2021 Chevrolet Silverado 1500 that you use to tow a trailer I recommend going with the Sumo Springs #SS45FR. These helper springs offer 1500lbs of load leveling support which will be plenty for towing a trailer as the suspension of your…

view full answer...

Can Ultra-Fab Ultra Scissor Jack # UF48-979006 Be Used in Multiples to Level a Trailer

Product Page this Question was Asked From

Continue Researching