Replacement Tailgate Seal for Extang Solid Fold 2. Tonneau Cover

Question

Question:

Is this seal compatible with / a replacement for the tailgate seal on a Solid Fold 2.0?

asked by: Jason D

0

Expert Reply:

Hey Jason, since you have an Extang Solid Fold 2.0 tonneau the correct tailgate seal would be the part # EX32563200. The part number you mentioned does not fit your cover.

expert reply by: Jameson C

0

Answer 1

Yes you can use the Replacement Side Seal for Extang Solid Fold 2.0 Tonneau Covers #EX32560368 as a replacement for your Extang Solid Fold 2.0 that's missing a side seal. This seal measures 68-1/2" long however it can also be trimmed if need…

view full answer...

Answer 2

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 3

Thanks for reaching out, Chris! I couldn't find that part either but I bet they are referring to the Timbren Suspension Enhancement System #TGMRTT35D along with a spacer kit to take up that extra spacing. If your vehicle frame is the same height…

view full answer...

Answer 4

The Replacement Tailgate Seal for Extang EnCore Tonneau Covers #EX32620278 is designed to fit over the channel at the rear of an Encore tonneau cover. It's a matter of removing the panels that give you access to the channel, sliding the old one…

view full answer...

Answer 5

The Side Rail End Cap for Extang EnCore Hard Tonneau Cover #EX35541800C is actually just for the driver side. The passenger side cap will be the #EX35541801C and will close off the tailgate side of the underbody rail assemblies. If you are looking…

view full answer...

Answer 6

The hinge seal you've looked at, part #EX32560669 would indeed be the correct hinge seal for your older Extang tonneau cover. Just to be sure, I called Extang and confirmed the fit with my representative.

view full answer...

Answer 7

Sure, if you don't want to use a breakaway battery system with a built-in charger like the Hopkins Engager #20099, you can use a solar panel. What you can use for a smaller breakaway battery is the 2.5-Watt Solar Battery Charger #PTW2997.…

view full answer...

Answer 8

'How dry' is kind of a subjective term that's pretty hard to define. Let me begin by saying that your average tonneau cover will do a pretty decent job of keeping the vast majority of the water out, but no Tonneau cover is completely…

view full answer...

Answer 9

In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV you will need to start with the tonneau cover completely open. You'll then remove the tonneau railing caps or stop blocks, remove the 2 hex…

view full answer...

Replacement Tailgate Seal for Extang Solid Fold 2. Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching