Will The Wheel Masters 4-Hose Inflation Kit # WM8001-135 Fit A 2018 Winnebago Vista 29VE

Question

Question:

I have a 2018 Winnebago Vista 29 VE. I am finding that things on the winnebago are not standard partsinch and require mechanic installation. I do have a certified repair close by. I am wondering if this kit can be used on my RV? Mainly for my outer dual tire 135 Degree and I want to get TPMS for our big trip this summer. Any assistance is appreciated. Peace, Chris

asked by: Chris

0

Valve Stem
(click to enlarge)

Expert Reply:

Hey Chris,

From what I can find your 2018 Winnebago Vista 29VE has 19.5" wheels so the Wheel Masters 4-Hose Inflation Kit # WM8001-135 would work. Based on the photo the 135 degree bend is likely going to be the best fit but you might have to play around with it to get it perfect. These inflation kits can easily be installed at your home so you aren't wasting money on labor. I've attached a short video below where Dave will walk you through the installation process.

expert reply by: Kevin C

0

Chris

5/15/2024

Thanks Kevin. I will be purchasing them soon. Probably this Friday. That will give me time to go back and look to see if I need 90 degree for the front (that is rubber valves). Should I look at a different product if they are rubber or will metal work? Thanks again. Peace, Chris

Reply

Kevin C.

5/15/2024

@Chris Motorhome tires are typically a lot higher of a psi rating and would come with metal valve stems. In the event that you do have rubber valve stems you can pick up some support brackets # WM8029VS, just make sure you fully clamp them to the rim.

Reply

Answer 1

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88295 is the best choice in air bags to help stabilize your load. These air bags are going to reduce the strain on your rear suspension. They're going to help increase safety and…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 7

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 8

I do have options for you but the cutoff date for replacement parts on Kwikee Steps is 1999. I spoke with Lippert and they said you most likely have a pre pre-IMGL step in which case none of the control modules will work for you. If it turns out you…

view full answer...

Will The Wheel Masters 4-Hose Inflation Kit # WM8001-135 Fit A 2018 Winnebago Vista 29VE

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching