Availability of Shock Kit for 2019 Lance 1475
Question:
Hello Is there an aftermarket shocks package for a 2019 Lance trailer trailer, model 1475. Thanks Lou
asked by: Luis C
Expert Reply:
Hi Lou; we do have a shock kit you can add to your 2019 Lance 1475. It looks like your trailer has a GVWR of 3,700 lbs so more than likely your single axle has a capacity of 3,500 lbs and a diameter of 2-3/8". I recommend verifying this information.
Assuming that is correct, you can use the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle # LC281255. Since this kit is designed for overslung axles (leaf spring sitting on top of the axle) you will also need to make sure your axle has this configuration. If not, you can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 to flip your axle. This will raises your trailer by the diameter of the axle plus the height of the leaf spring stack.
If you have an underslung axle and would rather not flip your axle, you could use the SumoSprings Trailer Helper Springs - Single Axle - 3K to 5K - Underslung # TSS-106-40. These act as shock absorbers, help minimize sway, and compensate for off-center loads. They're also progressive so they become more rigid as more weight is added. If you would like to use them for an overslung axle you would need the # TSS-107-40.
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Jounce Springs
- 3000 lbs
- 4000 lbs
- 5000 lbs
- Single Axle
- SuperSprings Intl
more information >
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Jounce Springs
- 3000 lbs
- 4000 lbs
- 5000 lbs
- Single Axle
- SuperSprings Intl
more information >
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Shocks
- Round Axle - 2-3/8 Inch
- Single Axle
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can Trailers Have Shock Absorbers Installed
- Q&A: Can Roadmaster Comfort Ride Leaf Spring Suspension Kit replace MORryde LRE Suspension Kit
- Q&A: Cushioned Equalizer Recommendation for Trailer with 33 inch Wheelbase
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks for 3 Inch Axles
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Cushioned Equalizer Compatibility with Tandem 3,000 lb Axles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Lippert Shock Kit Fit Enclosed Trailer with Boxed Frame
- Q&A: How to Position the Lippert Shocks on a Single Axle Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: How to Raise Your Travel Trailer Height
- Article: Brake Controller Installation: Starting from Scratch