Are Ultra Fab Landing Gear Jacks a Solid Replacement for Jayco RLDS

Question

Question:

im looking to replace my landing gear on a 2018 jayco rlds .it is slow an struggles an stops sometimes .gears are lubed an motor was replaced last year ,also new battery. i have read its a industry underrated problem. would you recommend the altra fab landing gears with seperate motors?

asked by: William M

0

Expert Reply:

Hey William, yeah the Ultra Fab landing gear jacks part # UF17-943010 are a really nice landing gear option but the only thing is the mounting brackets are a little different than most so worst case scenario you might have to have them moved on your camper.

expert reply by: Jameson C

0

William

4/26/2024

Also would 2 of the altra fab uf17-841002 work?

Reply

Jameson C.

4/26/2024

@William Yeah, but you'd need a wiring harness solution but isn't available. I do see why you'd want to go that route though sine the price is so much better.

Reply

William

4/26/2024

thankyou Jameson for your reply. Could you specify more details on your reply on ..HAVE TO MOVE THEM ON THE CAMPER?

Reply

Jameson C.

4/26/2024

@William So most campers use a pretty standard distance between the mounting brackets that the UF landing gear just are spaced differently. So what will need to happen most likely is the brackets will need to be cut off and then rewelded in a different location.

Reply

William

5/17/2024

@JamesonC Thankyou for your info.. bought the ultra fab landing gears an fit like a glove .No welding. not so pleased with the switches provided. they would stick out too far if installed in front of the rv where the other one is. had to build a switch box to mount inside a compartment door. Question.. looks like the motors are 30 amp each. what single switch could i get to add would handle both motors ? the original one i left on not in use looks like a 20 amp switch.

Reply

Jameson C.

5/20/2024

@William To be totally safe I would try and find a 60 amp switch since both motors are 30 amp. We don't carry any at this time though. Glad to hear the install went smooth!

Reply

Answer 1

Thank you for reaching out! The UF17-841002 part number that you're seeing tells me you have the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 on your Keystone 5th wheel trailer and while I do have a solution to help you get some…

view full answer...

Answer 2

I attached a picture that has a wiring diagram for the Ultra Fab Landing Gear part #UF17-943010 that you referenced. I also attached a link to the install instructions for this jack as well.

view full answer...

Answer 3

Since the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 that you referenced does not have that shaft that connects both legs there is no manual override crank for the landing gear set. They are both controlled independently of each other…

view full answer...

Answer 4

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

view full answer...

Answer 5

Hey William, yeah the Ultra Fab landing gear jacks part #UF17-943010 are a really nice landing gear option but the only thing is the mounting brackets are a little different than most so worst case scenario you might have to have them moved on your…

view full answer...

Answer 6

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 7

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…

view full answer...

Answer 10

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Are Ultra Fab Landing Gear Jacks a Solid Replacement for Jayco RLDS

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching