Do they Make a Hot Water Heater Heating Element w/ a 3/8" Fitting?

Question

Question:

Do they make a heating element for a 3/8s fitting? The smallest I can find is 1/2.

asked by: Eric

0

Expert Reply:

There might be someone who makes one that small but none of ours are. Additionally, all of our heating elements like the Replacement Screw In Heating Element with Gasket for Dometic Gas and Electric RV Water Heater item # DMC49FR are specific to certain water heaters.

expert reply by: Jerred H

0

Answer 1

We do indeed offer a replacement heating element for the Dometic WH-6GEA RV water heater which we sell as part #DMC74FR. You'll want to use part #DMC49FR which also includes the needed replacement gasket.

view full answer...

Answer 2

To choose the correct trailer axle for your application you will first need to measure the Hub-Face (A in picture) and Spring-Center (B in picture) measurements on your current axle(s). Since 800 kg converts to about 1,764 lbs I recommend looking at…

view full answer...

Answer 3

The Camco RV Drain Trap for 3/4-Inch Diameter Drain Hoses, part #CAM37262, has a threaded portion for connection to your RV sink that measures 1-3/4-inches in diameter at the threads. The overall diameter of the mounting flange is 2-5/8-inches. The…

view full answer...

Answer 4

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 5

Breakaway pins are not universal, so you wouldn't be able to replace your pin with another brand. However, breakaway switches are universal, so you can mix and match them to work with your UPG Model 42914 breakaway kit. With that being said, your…

view full answer...

Answer 6

You could use the Valterra RV Water Tank - Non-Toxic - ABS Plastic - 30" x 8" x 16" - 15 Gallons #R8030 as a gray water tank but gray water tanks usually have a larger drain hole to ensure that no food particles clog the drain line.…

view full answer...

Answer 7

The #RK909 Valterra ABS Tank Fill Kit with Threaded Cap is designed for ABS tanks where you have MDPE polyethylene. According to Valterra, you can use the pieces from the kit assuming they fit the holes on your tanks which you would need to measure.…

view full answer...

Answer 8

The outer diameter of the smallest round part of #331-TPSI-003 is 1-1/16 inches. That's not counting the tabs or the beveled section and is shown by the red arrow. I think that's what you're asking about. If not let me know. With that…

view full answer...

Do they Make a Hot Water Heater Heating Element w/ a 3/8" Fitting?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching