Inner Dimensions For Fender Assembly for Demco Kar Kaddy X Tow Dolly # DM66MV

Question

Question:

What is the dimension front to back of the opening that goes over the tire?

asked by: Scott J

0

Expert Reply:

I have included an image with the inner dimensions for the Replacement Fender Assembly for Demco Kar Kaddy X Tow Dolly # DM66MV. The inner opening is 31" front to back, 8-7/8" wide and 12-3/8" tall. This fender typically houses a 205/75R14 tire on the Tow Dolly # DM9713093.

expert reply by: Bud M

0

Inner Dimensions For Fender Assembly for Demco Kar Kaddy X Tow Dolly # DM66MV
(click to enlarge)

Answer 1

We offer the Reese 9485 as our own unique part number, #DT89MR, as well as the Curt #C60633 or the B&W #BWGNRK1320 which will all fit. If I personally had to choose between the two, I'd go with the B&W because I prefer the side-latch…

view full answer...

Answer 2

It looks like the SnapPad Grand Jack Pads for Equalizer Leveling Sytems #SP84FR74 has a 10" Pad #SP84FR and 12" Pad #SP74FR so you would need to select which pad you need. If you are referring to a different system please let me know so I…

view full answer...

Answer 3

The correct fenders for a Demco Tow It 2 are: Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 4

I was able to find the correct fenders for your Demco Tow-it 2 tow dolly, as the Replacement Fender #DM97FR will not fit your Tow-it 2. Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 5

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

view full answer...

Answer 6

The enclosed lid itself for the GearDeck 17 Cargo Carrier #H00604 has a height of right at 23", so just under two feet. You can use this measurement to see if it'll be able to fit inside your vehicle.

view full answer...

Answer 7

For the driver side you'd want the part #DM37FR and for the passenger side #DM97FR according to my contact at Demco who verified the dimensions you are in need of.

view full answer...

Answer 8

I looked up the online version of the 2015 Ford Fusion Hybrid owners manual and on page 226 it states that you can use a tow dolly to tow your Fusion. Check your owners manual to confirm. We do have a tow dolly, #RM-2050-1, and it will work if your…

view full answer...

Answer 9

Your 2018 Ford Fusion Hybrid should be in park if it is a FWD vehicle when using a tow dolly like #RM-2050-1. You will load the front wheels, put the vehicle in park, put on the parking brake, connect the wheel nets and then release the parking brake…

view full answer...

Inner Dimensions For Fender Assembly for Demco Kar Kaddy X Tow Dolly # DM66MV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching