Replacement Hubs For A 2017 Flagstaff MAC 206LTD Pop-Up Camper

Question:

I’m looking for hub assembly for my 2017 Flagstaff MAC 206ltd pop up camper. Prefer bearings already included inside so I won’t have to pack them. Thank you.

asked by: Jose S

Expert Reply:

Hey Jose,

There unfortunately isn't a guide to tell us the exact hub needed for your 2017 Flagstaff MAC 206LTD so we'll first need to know your bearing and grease seal combination as well the axle capacity and wheel bolt pattern. You'll need to either measure the spindle or check the face of your bearings and grease seal for their part numbers. If the numbers are worn off then you will need to measure points B, C, and D on the diagram below with a set of digital calipers # PTW80157.

To find the axle capacity you can see if the white axle tag sticker is still on the axle tube with the capacity listed on it. If not use the calipers to measure the tube diameter and we can use this sizing along with the bearings to help determine the capacity.

Next you'll want to measure the bolt pattern for the wheel so that the new hub assemblies match up. I've attached a little guide below showing how to measure the wheel bolt pattern.

Once we have all the info I'd be happy to look for the correct pre-greased hub to get your camper up and running again.

expert reply by: Kevin C