bing tracking image
Customer Service My Orders
Q & A Icon

Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle  

Question:

Can you give me similar recommendations as you did for question 212013 Im looking to add electric drum brakes to my pwc trailer. My axle has a max capacity of 3000 lbs. My tires are 13 inches. I have 5 on 4-1/2 inch bolt pattern wheel. I would also want everything needed for a breakaway kit.

0

Expert Reply:

Thank you for the pictures Matt. I do see you have the backing plate for the brakes so you are most likely going to have #84 spindle since your axle has a 3,000lb capacity. You can verify this by removing one of your hubs and measuring the landings for the grease seal(1.719"), inner bearing(1.378") and outer bearing(1.063"). If this matches what you have you will want the following parts.

Electric Drum Brakes # AKEBRK-35-SA
Hub/Drum # AKHD-545-35-G-EZ-K Qty 2
Junction Box # 3430001-JBK
Breakaway Kit # 3802346
7-Way Cable # H20044

You will also need some additional wire to run to the trailer brakes but the amount will depend on what length your trailer is.

expert reply by:
0
Bud M
Back of Torsion Axle Hub
Back of Torsion Axle Hub
(click to enlarge)
Wheel and Tire on PWC Trailer
Wheel and Tire on PWC Trailer
(click to enlarge)
Ask The Experts a Question >>

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>