Puck Covers for a 2020 GMC Sierra 3500 with OEM Puck System

Question

Question:

Do you have a set of puck hole covers for a 2020 GMC 3500 long bed dually?

asked by: Grady M

0

Expert Reply:

Hey Grady, thanks for reaching out!

We've been told by our customers that the Replacement Puck Plug Covers # 58199 will fit the GM puck holes, but they may not fill in the whole cutout in your truck bed. So while these will do a great job at protecting your OEM pucks internally, it might not look as clean as original GM puck covers will.

expert reply by: Jon G

0

Answer 1

For your 2019 GMC Sierra 2500, I believe the pucks are a standard size of other manufacturers but they do space them out differently. You can use the Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails (Qty 2) #58199.

view full answer...

Answer 2

Since your 2018 GMC Sierra 2500HD has the OEM Prep Package, you can use the Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails #58199 for the four puck holes which will cover the openings of the hitch to keep dirt and…

view full answer...

Answer 3

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 8

Yes, the Air Lift LoadLifter 5000 Air Helper Springs #AL57341 will fit your 2024 Chevrolet Silverado 2500 double cab with the Duramax diesel engine and factory puck system. We installed the upgraded Springs #AL88341 on a similar 2022 which I have…

view full answer...

Answer 9

If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System #LC736514-ELKIT then you'll need part #LC182492. The flat bracket can be swapped out with part #LC182494 and the swing brackets can be replaced with…

view full answer...

Answer 10

Congrats on the new truck! You won't have to swap our your Curt Q20 Hitch but you will need to use an adapter because GM changed the puck pattern in 2020. The correct adapter is the Item #C88KR you were looking at. This will mount directly to the…

view full answer...

Answer 11

Looking at pictures I found of the 2002 Lance 1121 it looks like it has HappiJac jacks on it. For the brackets you can use the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems #LC182496. The replacement legs will require more…

view full answer...

Answer 12

Hey David, so the Reese part number 30118 is related to a hitch that was designed to fit above bed fifth wheel rails so to use it with your 2024 GMC Sierra that has the in bed puck system you would want the rail kit adapter part #C88KR.

view full answer...

Puck Covers for a 2020 GMC Sierra 3500 with OEM Puck System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching