Will The Camco RV Drain Trap CAM37262 Work With A 2" Hole In The Shower Pan?

Question

Question:

Is this designed to work on a tv shower pan? I have a 2” hole in the pan. Is it normal to just use hose connection to the gray tank for a shower? Thanks

asked by: Floyd S

0

Expert Reply:

The Camco RV Drain Trap # CAM37262 will work fine with the 2" hole in your shower pan. I was not able to find any specs or references for this "tv shower pan" you mentioned, but if the drain hole is 2" it should work fine. It is completely normal to have the shower drain hose connected to the gray water tank.

expert reply by: Jesse M

0

Answer 1

The inside diameter is 3/4" for the #CAM37262. The hose will expand with some pressure up over the ribs and a hose clamp will tightly secure the hose onto the drain trap.

view full answer...

Answer 2

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 3

I reached out to my contact at Lippert and he said that it sounds like you have an older Power Gear Manual Leveling kit that had the ground running from the solenoid to the control board. This new kit, part #LC359259, can be used as a replacement but…

view full answer...

Answer 4

Thanks for the pictures! The best hitch for your 2023 Mercedes-Benz Sprinter 2500 is the etrailer item #e82TR. This hitch is custom fit and bolts to your Mercedes with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

It looks like you recently purchased some Kodiak Wheel Bolts #K58WB316 and 5/8" flange nuts #95188 from us, so thank you for being a loyal customer! What you'll want to torque those to will depend on the construction of your wheels and the…

view full answer...

Answer 6

You are correct, they are slam latches and we do carry replacement options. However, to determine the correct replacement slam latch, we will need to know your cut-out hole dimensions. Unfortunately, there is not a database or anything that gives us…

view full answer...

Answer 7

It sounds like you're looking for a 3 foot long supply hose; typically the outlet end of a regulator will almost certainly be a 3/8" female NPT and from the picture you sent it looks like you've got a female flare connector on the other…

view full answer...

Answer 8

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Answer 9

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a 1/2-inch…

view full answer...

Answer 10

To raise and lower the Lippert Spare Tire Winch with Offset Cable #LC159056 what you need is the replacement manual crank handle part #LC119226.

view full answer...

Answer 11

The Lippert Components Spare Tire Winch with Offset Cable #LC159056 requires the handle #LC119226 to crank up and down.

view full answer...

Answer 12

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Will The Camco RV Drain Trap CAM37262 Work With A 2" Hole In The Shower Pan?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching