Can a 20 Amp In-Line Circuit Breaker be Installed Under the Dash of a 2002 Mazda Protege

Question

Question:

Part# 9506p can it be installed under bash in said vehicle

asked by: Mr.Mrs.Antonio G

0

Expert Reply:

Yes, you can install the in-line 20 amp circuit breaker, # 9506P, pretty much anywhere on any vehicle including your 2002 Mazda Protege and including under the dash. I have included a link to a video that, in part, shows this circuit breaker being installed.

expert reply by: Michael H

0

Answer 1

To replace the Wesbar 203260 side lights on your trailer, I recommend looking at the Optronics Thinline Trailer Clearance or Side Marker Light #MCL67AB. This light measures 4-1/8 inches long x 1-1/4 inches wide x 1-3/16 inches deep, which is…

view full answer...

Answer 2

For your 2016 Toyota 4 Runner, I recommend the Inno Aero Crossbars #INXB138-2 and Inno Through Feet for Aero Crossbars #INXS150. For your Kayak Carrier, to avoid the J-style, I recommend the the Thule Stacker Kayak Carrier System #TH830. For a…

view full answer...

Answer 3

According to Kat's the part #KH11813 will install in the RL or rear left cartridge. If you were facing the engine with the hood up it would be just around the driver side corner of the engine. It does not come with a cover as it basically…

view full answer...

Answer 4

I really wish we did, but we do not have any adjustable ball mounts that fit a 1-1/4 inch hitch like the #MT70068 that you referenced. The added length and leverage of the adjustable ball mounts is why they aren't made for the lighter duty…

view full answer...

Answer 5

Yes, trailer wiring harness #118551 is a fit for your 2009 Ford E350 van. I have linked a video showing installation on a 2008 E350 which will be the same as the installation for your 2009.

view full answer...

Answer 6

Yes, the Saris Bones bike rack #SA801BL will fit your 2017 Mazda 3 hatchback with the spoiler but you will need to add and use Hatch Huggers #SA3035 in place of the side straps. Also the use of the Hatch Huggers reduces the bike rack capacity to 2…

view full answer...

Answer 7

For your older Snowbear plow we have confirmed with them that the correct kit to convert it to fit a 2 inch hitch is the part #SB324-120 that you referenced. Then for a hitch for your 2015 Ram Big Horn you'd want the Curt #C31067 and you'd be…

view full answer...

Answer 8

If your Jensen RV Stereo #JWM60A will not turn on, it's going to be either because it's not getting power, it's not grounded properly, or the fuse is blown. Since you already tried resetting the unit, we'll start by checking the 10…

view full answer...

Answer 9

For a wireless camera that would work great to view the gooseneck ball of your trailer as you hitch up I would recommend the Swift Hitch part #SH02Digital. This camera works very well and is less prone to interference when compared to other wireless…

view full answer...

Answer 10

You can replace it with the same fireplace which would be the Greystone 26" Electric Fireplace with Crystals - Recessed Mount - Black Item #324-000069. This unit will fit right into your cutout with the same exact mounting holes.

view full answer...

Answer 11

Rewiring your 14 foot dump trailer is pretty straight forward. I would start with a 20 ft. Wishbone 4-Way Trailer Wiring Harness, #A20WB, to provide wiring for the stop turn and tail lights on your trailer. We have a video detailing how to install…

view full answer...

Answer 12

The actual towing capacity of your 2015 Honda CR-V, which is 1,500 lbs according to the owner's manual, will not decrease with the angle of the boat ramp when using a hitch such as the Curt #C13119, though towing a trailer of any kind can result…

view full answer...

Can a 20 Amp In-Line Circuit Breaker be Installed Under the Dash of a 2002 Mazda Protege

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching