Steel Thickness of the Redline Light Guard

Question

Question:

how thick is the metal on redline trailer light protector LG440NP? Thanks, looking for something very strong and sturdy.

asked by: John E

0

Expert Reply:

The Light Guard # LG440NP you're looking at John, is .15" thick.

expert reply by: Bryce D

0

Bracket Dimensions
(click to enlarge)

Answer 1

Yes, the light assemblies of the #TLL9RK will fit in the Light Guard #LG440NP. The #LG440NP has inside dimensions of 5 by 5-1/2 inches and the assemblies of the #TLL9RK are 5-3/16" long by 4-3/4" wide so they would fit.

view full answer...

Answer 2

The Light Guard #LG440NP is actually made for the Peterson Square Lights #432400 (Left Hand) and #432200 (Right Hand). These lights come with wiring for the side marker lighting. The Light Guard is just a mounting bracket and does not light up the…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 4

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 5

If you think the cause for the noise on your 2015 Jayco Whitehawk 24RBS tandem-axle travel trailer is from the normal travel of the suspension components (leaf springs, equalizers and shackle straps), you might switch over to wet bolts. The squeaking…

view full answer...

Answer 6

The most similar trailer clearance lights we offer to replace the PM150 lights you have now would be the Thinline LED light part #AL91RB. For a replacement harness that would plug into this you'd need the part #A46PB and then for a grmmet part…

view full answer...

Answer 7

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 8

I would check the magnets for wear before going on to test them with a meter. If the magnets show abnormal wear or if you can see the windings beginning to show through the friction surface of the magnet then they will need to be replaced. To further…

view full answer...

Answer 9

Most likely the new axle has self-adjusting brakes which when new are known for feeling pretty weak. The good news is that you can keep applying them over and over while the trailer is traveling and they will tighten and get more sensitive feeling.

view full answer...

Answer 10

You can use the 8-1/4-inch overall length of the TruRyde BT8 1-1/2-inch Spindle #TRU97FR to help you determine the correct length for your axle tube. You also need to take into account the width of the tires you intend to use as these also will…

view full answer...

Answer 11

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Steel Thickness of the Redline Light Guard

Product Page this Question was Asked From

Continue Researching