Will Inno Square Bar Feet Work with Older Thule Square Bars

Question

Question:

Will the Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4 - INFR work with the older Thule Square Bars? The rep from Thule said I need their old product, Thule Crossroads 450 foot pack but they dont carry it anymore. Your product appears to be similar.

asked by: Rodney S

0

Expert Reply:

Yep! The current Inno square bar feet # INFR do work with the older Thule square crossbars since the two square bars are identical in dimensions.

expert reply by: Jameson C

0

Answer 1

So your Thule Hullavator carriers 897XT weigh right at 20 lbs per carrier. So you'd have 40 lbs of carrier and 120 lbs of kayaks. That would mean you'd have 5 lbs of capacity to spare and would be technically safe. Since Thule now uses a…

view full answer...

Answer 2

I have a replacement option for you, but I reached out to my contact at Thule and he confirmed that the older Thule Hullavator 897XT you have will unfortunately not fit your new Thule ProBar Evo Crossbars #TH713600. He mentioned that unfortunately…

view full answer...

Answer 3

The Inno roof rack route is the best solution to allow you to reuse your current Thule square bars since Thule changed their design. Inno bars are the exact same shape which is why you can use their feet part #INFR-6 on your 2006 Subaru Outback Wagon…

view full answer...

Answer 4

The parts needed to install the Prodigy P3 #90195 on your 2024 Honda Pilot all depends on if you have the factory tow package or not: With Factory Tow Package - Wiring Adapter #3070-P Without Factory Tow Package - Curt Powered Wiring Kit #C59496 -…

view full answer...

Answer 5

The dimension you are looking for on the #RR31102 is 1-1/2".

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty 50-Inch Roof Rack Crossbar #RB1250S has cross-section dimensions of 1-7/8-inches tall and 1-5/8-inches wide, as shown in the photo I prepared for you. We also offer two bars as a set #RB1250. The vehicle known as the…

view full answer...

Answer 7

I measured the widths of the c-channel on the Rhino Rack Vortex Aero Crossbars and the bottom width is 7/8 inches and the neck width is 7/16 inches. I have attached a photo showing these measurements for you to check out. As long as the t-bolts on…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...