Replacement Roller or Carpeted Bunks for a Boat Trailer
Question:
My boat has 7 ft bunks and the roller are 4 ft. What would be a good placement for the rolllers.
asked by: Nancy
Expert Reply:
You could so with 2 sets of the 4 foot rollers, # DL21740, and either have the extra foot or trim them to length. Ideally you would want rollers anywhere the boat rests on bunks. These roller bunks can be attached directly to a flat surface or you can use bracket # DL21742 (4 needed per set).
We also have carpeted bunks, 4 feet long, all ready to be installed, # CE27810. Carpeted bunks have more resistance though than rollers. To mount these you can use bracket set # CE10000G-4 per bunk set. You would need 2 sets of bunks and brackets total to match (and slightly exceed) the length of the current bunks.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 2 Inch Tall
- 8 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 48 Inch Long
- CE Smith
more information >
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 & DL21741
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- Zinc-Plated Steel
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Q&A: Window Cover Recommendation for Class C Motorhome Built on F-550
- Q&A: Will the Pintle Hook # 63015 Attach to the Super Titan Pintle Hook Plate # RP38186
- Q&A: What Size Hardware Should Be Used With the Super Titan Forged Pintle Hook Plate
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Recommended Replacement Grease Seal and Braking Assemblies for an AL-KO 7210
- Q&A: Size of U-Bolt Slots in Dutton-Lainson # DL21742 Roller Bunk Bracket for Roller Bunks DL21740/41
- Article: Trailer Lighting Requirements
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: Trailer Wiring Diagrams
- Article: Best Ladder Racks
- Article: How to Bleed Your Trailer Surge Brakes
- Article: RV Cell Boosters, How Do They Work?