Replacement Prop Rod For Leer Hard Tonneau Cover LE42FR on Ford F-250

Question

Question:

Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers Item # LE94MR Good day, we have the Leer X2T Tri-Fold Tonneau cover 2018 and need to replace a Prop-rod. Our research resulted in the #LE94MR, which seems to be the correct part, our truck is a 2018 Ford F-250 Super Duty with the 6.5foot bed. Can you please confirm we identified the correct part? Thank you very much for your support

asked by: Annette H

0

Expert Reply:

We do have the part you need, but it's different than the one you mentioned. I checked with Leer, and the correct replacement prop rod for the Leer Hard Tonneau Cover # LE42FR on your 2018 Ford F-250 is the following:

- Replacement Prop Rod Assembly for Leer Tonneau Covers # LE54MR

expert reply by: Kyle S

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 4

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

view full answer...

Answer 5

From previous customers with the Grand Design Solitude S Class ST2930RL we know that know that it has the Lippert 1621 pin box model and since we know the GVWR of the RV is 15k so for a MORryde you'd want the part #MR84VR.

view full answer...

Answer 6

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 8

The BAKFlip MX4 Tonneau Cover #BAK48330 for the 2022 F-250 short bed has 4 panels. While you are using your Demco Autoslide 5th Wheel Hitch #DM8550024 you will be able to keep one panel laying flat on the bed. There are tow ways you can store the…

view full answer...

Answer 9

The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV will be just fine if you need to lift your 2022 Ford F-250 Super Duty, but it will be good practice to lower the psi rating to 5 prior to lifting the truck. I confirmed this…

view full answer...

Answer 10

We do have the part you need, but it's different than the one you mentioned. I checked with Leer, and the correct replacement prop rod for the Leer Hard Tonneau Cover #LE42FR on your 2018 Ford F-250 is the following: - Replacement Prop Rod…

view full answer...

Replacement Prop Rod For Leer Hard Tonneau Cover LE42FR on Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching