Universal Flat Towing Base Plate Kit for 1997 Toyota 4Runner for Blue Ox Tow Bar

Question

Question:

Looking for a base plate for the blue ox tow bar. I have a 97 toyota 4runner but its got a custom bumper. Is there anything that you sell that is just the adapter so i can fab my own plate to fit. Thanks

asked by: Michael H

0

Expert Reply:

Since you have a Blue Ox tow bar the best solution would be the Blue Ox Bolt On base plate kit part # BX88230 which would work great as long as your custom bumper was rated for flat towing.

expert reply by: Jameson C

0

Answer 1

Spacing the brackets of the Blue Ox Bolt On base plate kit part #BX88230 17 inches apart on center would be fine. Normal spacings of these brackets is 16 to 34 inches apart on center so 17 inches on center would be perfectly fine.

view full answer...

Answer 2

As long as your 1996 Toyota 4Runner is the 5 speed manual 4 cylinder, then yes, you can flat tow it. You will need to check your owner's manual to make sure that you follow any specific instructions on flat towing as well. For base plates I…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 8

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your '24…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 11

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

view full answer...

Answer 12

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Universal Flat Towing Base Plate Kit for 1997 Toyota 4Runner for Blue Ox Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching