Can I Use A Single On/Off Rocker Switch As A Replacement Switch For A Hot Water Heater

Question

Question:

The electric switch for the hot water heater is currently located on the water heater outside the RV. I would like to move the switch to the control panel next to the water heater gas switch inside the RV. Will this switch work.

asked by: Terry H

0

Expert Reply:

Yes, a single on/off rocker switch like the # 37213685 will work great for a water heater switch. It can be used with the faceplate part # 37212855, or it will fit in any cutout 1-1/8" x 9/16"

expert reply by: Jesse M

0

Answer 1

The cut out dimensions listed for the JR Products Switch part #37213815 are right at 3/4 inches wide by 1-1/2 inches tall that we measured when we had one out.

view full answer...

Answer 2

Hey Dave, for a 60 amp charger the 6-gauge wire that you have currently is not going to cut it. You will want to use 4-gauge copper wire for your 15' run when using the Progressive Dynamics PD9200 Series Battery Converter Charger #PD9260C. For a…

view full answer...

Answer 3

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 4

The fan on your Progressive Dynamics #PD9260C running more often than usual could mean a couple of things are going on here; and you're correct in thinking that most of them aren't a good sign. It sounds like you've cleaned out the vents…

view full answer...

Answer 5

To flat tow a 2024 GMC Sierra 2500 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Direct-Connect Base Plate item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms…

view full answer...

Answer 6

Hi Robert, To install your Putco Blade LED Tailgate Light Bar #P22KR you'll need to just remove the tail lights so that you can get access to the back wiring in the back of them. The plug-and-play connectors on the wire harness with have a male…

view full answer...

Answer 7

We can get your 2024 Chevy Silverado 1500 4x4 set up with a complete system for flat towing, and I'll go ahead and list out all the parts you need to make it easy to order: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #RM86MR - Tow…

view full answer...

Answer 8

The NSA Ready Brute Elite tow bar is a pretty iconic system and while we have carried it in the past, that was long enough ago that we don't really have too much information on the system anymore. I will say that while I do like the idea of…

view full answer...

Answer 9

To safely tow your truck, you'll need a base plate, tow bar, safety cables, a wiring solution to ensure the truck taillights work in conjunction with the coach and a supplemental braking system. I'd recommend the Blue Ox #BX2163 base plate…

view full answer...

Answer 10

Here's how you will know if the SMI Air Pressure Stop Light Switch Kit #SM99629 is needed when using the SMI Air Force One supplemental braking system. With you engine turned off on your vehicle go out and press the brake pedal of the vehicle. If…

view full answer...

Answer 11

Since your brake lights don't come on in your Jeep Cherokee when the ignition is off (and I am assuming you are flat towing with the ignition off) then you wouldn't need a brake light relay like part #RM-88400 as this is normally the fix for…

view full answer...

Can I Use A Single On/Off Rocker Switch As A Replacement Switch For A Hot Water Heater

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching