How Thick Is The Steel Of The Roadmaster Direct-Connect Base Plate Kit # RM-521453-5

Question

Question:

How thick is the steel on the brackets where they are bolted on to the frame where the bumper supports were mounted?

asked by: Charles E

0

Expert Reply:

The portion of the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 you have circled is 1/4" thick steel.

expert reply by: Kevin C

0

Roadmaster Direct-Connect Base Plate Kit # RM-521453-5
(click to enlarge)

Answer 1

The absolute best base plate kit for your 2024 Jeep Wrangler Unlimited is the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 because it not only looks great (see attached photo), but it's also really easy to use once installed. This kit is…

view full answer...

Answer 2

This is a good question. So it really comes down to preference between the Roadmaster base plate kits that have the crossbar and the ones that do not. The kits like you have #RM-521453-5 without the crossbar are actually reinforced more at the welds…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

I would be happy to help you set your 2022 Jeep Gladiator for flat towing. You're going to need a base plate kit, a tow bar, tow bar wiring, supplemental braking system, protective screen, charge line, stop light switch, and a high/low adapter. I…

view full answer...

Answer 5

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 6

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 9

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

view full answer...

Answer 10

Hey Dave, In my opinion the etrailer Invisible Base Plate Kit #e98948 is going to be the stronger option compared to the Blue Ox Base Plate Kit #BLU53FR. Blue Ox started adding safety cables to their baseplate kits as a last resort backup in the…

view full answer...

Answer 11

Hi Randy, For your 2022 Jeep Gladiator I have the following flat towing component recommendations: Baseplate: If you have a standard model with a factory bumper or a Rubicon with a factory bumper then you can use the Roadmaster Direct-Connect Base…

view full answer...

Answer 12

The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR can be used with your LEDs, the only caveat is that if your Jeep has ParkSense proximity sensors then you'd need to use the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles…

view full answer...