Will Progressive Dynamics Replacement Section Charge Batteries With Engine On

Question

Question:

Does this converter charge the house battery lithium when the vehicles engine is on? With the house battery disconnected, I put a voltage meter in the positive and negative cables with the engine on. I do get voltage but it is only 12.9, shouldn’t it be 13.6 for agm and 14.3 for lithium? Changing the pitching / agm pin on the converter doesn’t seem to change the voltage. This is on a 2008 Winnebago view.

asked by: Kevin K

0

Expert Reply:

The Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel # PD4645V will only charge the batteries with shore power. You won't be able to charge your house battery from the engine. This is compatible with Parallax/Magnetek model 6345, WFCO model 8945, and Parallax models 7345 and 8345. The reason you're only getting 12V is because that is the voltage from your alternator.

expert reply by: Robin H

0

Answer 1

I confirmed with Progressive Dynamics that the replacement part you need is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V.

view full answer...

Answer 2

According to Progressive Dynamics, their #PD4645V Replacement 45A converter would be the proper replacement for your Parallax 7345 power converter. The unit is designed as a direct replacement for the converter in your existing power…

view full answer...

Answer 3

The Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V is rated for 45 amps of 12 volt power with up to 610 watts of output power. This is roughly the same amount of input wattage or about 5.1 amps of 120 volt power at maximum draw.…

view full answer...

Answer 4

Yes, it will. To replace your model 7345 converter you will want the Replacement Converter item #PD4645V you referenced.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 7

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is a replacement for your converter. It will work very well based on the cross-referencing for a perfect fit. All converters have a battery charging system…

view full answer...

Answer 8

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Answer 9

We do have the correct replacement converter/charger for your system. - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V works with…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 12

For your Parallax/Magnatek 6300A model 6345, I recommend going with the: -Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V. This system has a 45 amp output same as your current model 6345, will work with flooded lead…

view full answer...