Replacement Converter for Magnetek 7345

Question

Question:

will the Parallax/Magnetek or WFCO RV Power Centers - 45 Amp # PD4645V. work for a replacement on Series 7300 Model#7345 It also says Fan Thermally controlled under model number I cant find any other information like name or Amps on the converter than this

asked by: Christina T

0

Expert Reply:

Yes, it will. To replace your model 7345 converter you will want the Replacement Converter item # PD4645V you referenced.

expert reply by: Jerred H

0

Answer 1

According to Progressive Dynamics, their #PD4645V Replacement 45A converter would be the proper replacement for your Parallax 7345 power converter. The unit is designed as a direct replacement for the converter in your existing power…

view full answer...

Answer 2

I confirmed with Progressive Dynamics that the replacement part you need is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V.

view full answer...

Answer 3

Yes. You can use the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V to replace your Magnetek 7345.

view full answer...

Answer 4

The Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V is rated for 45 amps of 12 volt power with up to 610 watts of output power. This is roughly the same amount of input wattage or about 5.1 amps of 120 volt power at maximum draw.…

view full answer...

Answer 5

The Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel #PD4645V will only charge the batteries with shore power. You won't be able to charge your house battery from the engine. This is compatible with…

view full answer...

Answer 6

If the Converter #PD4645V for your Parallax 7300 is converting power from 120 volt to 12 volt but your battery is not taking a charge you will either have a wire damaged/disconnected wire or the battery needs replaced. Depending on the age and…

view full answer...

Answer 7

The correct replacement converter section of the Parallax 7345 that you have is the part #PD4645V.

view full answer...

Answer 8

The correct part to replace your current converter charger is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp part #PD4655V. This is an exact replacement and will be all you need to get back operational. I have…

view full answer...

Answer 9

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 10

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 11

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is a replacement for your converter. It will work very well based on the cross-referencing for a perfect fit. All converters have a battery charging system…

view full answer...

Answer 12

The correct replacement converter for your Parrallax 7300 Model 7355 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp #PD4655V. This is an exact replacement but it only comes as a full assembly, you can not…

view full answer...

Replacement Converter for Magnetek 7345

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching