Dimensions of InfiniteRule Trailer Coupler Lock

Question

Question:

What is the distance between the 1/4" pin and the other side of the lock where it comes apart. I need to know the size of that gap. I would also like to know how long the sides are. Thank you.

asked by: Doc

0

Expert Reply:

The distance between the 1/4" pin and the main lock body on the # IR98FR is 11/16". The length of the sides is 2-1/16".I have attached a diagram below showing all of the measurements for your reference.

expert reply by: Robin H

0

InfiniteRule IR98FR Dimensions.
(click to enlarge)

Answer 1

Yes, the Curt Custom Base Plate Kit #C36JR is confirmed to fit your 2020 Ford Expedition 4wd. It will also allow for you to use a Blue Ox Tow Bar #BX7420. Do ensure you install a Charge Line Kit #RM-156-25 as the battery will while being flat towed…

view full answer...

Answer 2

The distance between the 1/4" pin and the main lock body on the #IR98FR is 11/16". The length of the sides is 2-1/16".I have attached a diagram below showing all of the measurements for your reference.

view full answer...

Answer 3

The clicking noise you heard typically occurs when the factory brake controller isn't compatible with electric over hydraulic brake systems. Since everything worked fine up until recently, the problem most likely does lie with your…

view full answer...

Answer 4

The Americana Modular Wheel #AM22461 shares the same dimensions as your SRW 31767A0 trailer wheel. It has the same 17.5" x 6.75" size with 8 on 6.5" bolt pattern and -0.5" offset. It also has the same 6,005lbs…

view full answer...

Answer 5

We can get your 2023 Ford Expedition 4WD a Blue Ox flat towing set up. To make it easy to order I'll go ahead and list out the correct parts for you: - Base Plate Kit: Blue Ox Base Plate Kit #BLU76CR - Tow Bar: Blue Ox Alpha 2 Non-Binding Tow…

view full answer...

Answer 6

Thanks for reaching out! It looks like we did carry that exact wheel at one point on our site but it has since been removed. I reached out to our team about it and they said our rep told us it was NLA'd (no longer available) back in May of…

view full answer...

Answer 7

Hey Bill, so yeah we worded the fit of the lock you mentioned odd but it's not going to fit a 3 inch setup but we can help as we have the Blaylock EZ part #BLTL-60-40D that was designed for 3 inch diameter setups like you have.

view full answer...

Answer 8

The etrailer tow bar part #e67ZR that you referenced can be used to tow both of your vehicles with Blue Ox base plate kits. For the 2023 Ford Expedition the part #BLU76CR is correct and for the 2019 Ford F-250 part #BX2675. Now for a braking kit…

view full answer...

Answer 9

As you have a Solera Edge awning on your 2022 Forest River Cherokee you will have to replace the entire awning to be able to use a Solera Screen Room #LC362218 or Solera Family Room #LC362230. The arms you have are specific to the Edge awning so you…

view full answer...

Answer 10

Yes we sell just the 7-way to 6-way cord included in the Demco #DM9523010-54 you were looking at without getting the diodes. You'll need #DM9523054, though it will come with a new 6-way plug that you can keep as a spare. There's no way to…

view full answer...

Answer 11

The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…

view full answer...

Answer 12

For the Roadmaster InivisiBrake monitor part #RM-9530 you'd wire it to your Invisibrake by running the black wire to ground, the red wire to 12 volt power, the yellow to the breakaway switch, and the blue wire to the brake light switch. I also…

view full answer...

Dimensions of InfiniteRule Trailer Coupler Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching