Is The B&W Ball and Safety Chain Kit Universal For The Puck System In Every Truck?

Question

Question:

So for the BandW gooseneck puck ball system Is this universal? I’m buying one used and the guy said it fits his ram but will it fit on my 2022 Chevy 3500 SRW?

asked by: Theo

0

Expert Reply:

There are 2 different B&W Ball and Safety Chain Kits. There is one for the Ram # BWGNXA2062 and one which fits Ford, GM, Chevy, and Nissan Titan XD # BWGNXA2061. So if his fits the Ram you will not be able to use it on your 2022 Chevrolet Silverado 3500.

expert reply by: Bud M

0

Answer 1

Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part #C60629 which has a rise built-in or…

view full answer...

Answer 2

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

view full answer...

Answer 7

The best gooseneck hitch ball kit for your 2019 Ford F-350 Super Duty with the factory gooseneck is the B&W Ball and Safety Chain Kit #BWGNXA2061 because its hitch ball is simple to put in or remove and B&W is known for making the most…

view full answer...

Answer 8

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 9

Sorry for any confusion that may have arose, but what you want is the U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles #APUBR-35. These are designed for 3 inch diameter, 8,000 lb axles and are compatible with the Roadmaster Comfort Ride Leaf…

view full answer...

Answer 10

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 11

Hey Travis, it took me a second but the OEM prep package is basically a gooseneck hitch rail system pre-installed in the bed of your 2019 Chevy Silverado 3500. If you look in the bed of your truck and see 5 holes/mounts then you have the OEM prep and…

view full answer...

Answer 12

Yes we do carry the B and W gooseneck ball and safety chain loop kit part #BWGNXA2062 that you are looking for. This does fit your 2022 Ram 2500 with the OEM pucks.

view full answer...

Is The B&W Ball and Safety Chain Kit Universal For The Puck System In Every Truck?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching