Towing Mirrors for 2023 Chevrolet Colorado

Question

Question:

Love the look of the mirror is there any way it will work with a 2023 Chevy Colorado?

asked by: James E

0

Expert Reply:

The Longview Custom Towing Mirrors # LV97RR are confirmed to fit the 2017-2022 Colorado. We have not had an opportunity to test fit these on a 2023 Colorado yet so it is possible but I cannot guarantee they will work. The only mirrors we know will fit at this time are universal mirrors like the K-Source # KS3891-2.

expert reply by: Robin H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The K-Source tow mirrors #KS3990 would work great on your 2023 Ford Expedition. We had a chance to install them on a similar 2018 Ford Expedition and found they installed easily, worked great, and the highest reviewed option we know fits.

view full answer...

Answer 4

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

We do have a trailer hitch receiver that fits your 2023 Chevy Colorado, though not the part number you mentioned. The correct fit for a hitch on your '23 Colorado is instead the following: - Curt Trailer Hitch Receiver #C78VV I verified this…

view full answer...

Answer 9

Yes, our part number #RM28GR and the Roadmaster 523222-5 and one and the same. We use our own unique part numbers for a lot of Roadmaster parts. The Roadmaster Direct-Connect Base Plate Kit #RM28GR (523222-5) will be the correct base plate for the…

view full answer...

Answer 10

I was able to verify that we do have a trailer hitch that fits your 2024 Chevy Colorado. The hitch is made by Curt and is the following part number: - Curt Trailer Hitch Receiver #C78VV This is a 2 inch hitch with an 8,000 lb towing and 800 lb tongue…

view full answer...

Answer 11

First you will need to add the Curt Trailer Hitch Receiver #C78VV to your 2024 GMC Canyon. Do note this will replace a factory crossmember that is used since your Canyon did not come with the factory tow package. Next the Hopkins Multi-Tow 7-Way…

view full answer...

Answer 12

I checked with Konig and can confirm that the Konig Tire Chains item #TH01594267 will fit a 265-65-R18 tire on a 2023 Chevy Colorado. These are sold in pairs. I have linked an installation video below we did on a 2020 Colorado with a similar set of…

view full answer...