Is there a Hitch for the 2013 Toyota Tundra's that Have a Factory Hitch?

Question

Question:

Truck is a 2013 Toyota Tundra SR5 with a factory installed tow package and hitch receiver. I need to replace the hitch receiver due to rust. Can I use the Curt C15398 package and does it support the bumper or do I need something else to add for bumper support. IIf the above doesnt work do you have any suggestions for a solution?

asked by: Anthony T

0

Expert Reply:

Yes, you can! We've spoken to Curt about this exact issue before and we do have a solution. The Curt Hitch item # C15398 is designed for the 2013 Toyota Tundra's that come without a factory hitch. However, it will fit the Tundra's that came with a factory hitch so long as you remove it and the bracing that attaches it to the bumper.

The Curt Hitch item # C15398 is a class V hitch with a 2" receiver. It has a 16,000 lbs towing capacity and a 2,400 lbs maximum tongue weight.

expert reply by: Jerred H

0

Answer 1

Since you're willing to remove your 2008 Toyota Tundra's factory hitch, I recommend the etrailer Hitch item #e66KR. This is a class V hitch with a 2" receiver. It has a massive 16,000 lbs towing capacity, which is the closest…

view full answer...

Answer 2

The answer to your question will depend on if you have the actual 'factory' hitch which is incorporated into the bumper brackets or the 'dealer installed' hitch which is just bolted to the frame. If you have the dealer…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I reached out to Curt about removing the factory hitch on your 2011 Toyota Tundra. If you remove the factory hitch the Curt Hitch Receiver #C15398 can be installed. However, when you remove the factory hitch you will be taking out some of the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Is there a Hitch for the 2013 Toyota Tundra's that Have a Factory Hitch?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching