Is There a Fat Tiire Adapter for the Swagman Escapee Bike Rack  

Yes, the Yakima HoldUp 4 Bike Platform Rack #Y02443-2 will work with bikes that have wheels from 20 - 29 inches in diameter, so it will easily accommodate both your children's bike with 20 inch wheels, and your bike with 27.5 inch wheels as long…

There are no straps included with the Yakima HoldUp 4 Bike Rack , part #Y02443-2. The carrier holds the bikes in place using the upright masts with hooks. The bike does include ratcheting straps for the wheels that help hold the bike in place.

The Swagman Escapee Bike Rack #S39SR is a great solution for e-bikes that don't utilize a front fender. It doesn't come with a ramp but one can be added on: - Loading Ramp for Swagman Skaha and Escapee Bike Racks #S59SR I really like this…

I measured the Swagman E-Spec Bike Rack for 2 Electric Bikes part #S94FR for you and the distance from the center of the hitch pin hole to the center of the first wheel tray is about 16".

The Yakima HoldUp bike rack part #Y02443-2 would be a great option for what you listed. This rack has sliding wheel trays which allow it to fit all of the bikes you mentioned wheelbases. Since it is wheel-mounted, you would not need an adapter for…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

The Hollywood Racks RV Rider #HLY64FR has a frame clamp design that was intended for use with step through style bike frame like what your Aventon Adventure bikes have so this rack would work perfect for you. I attached a picture that shows this…