Does EcoHitch Trailer Hitch Fit 2024 Toyota RAV4 Prime

Question

Question:

can you tell me if there is an ecohitch trailer hitch that fits the 2024 toyota rav4 prime?

asked by: Henry F

0

Expert Reply:

I am happy to confirm for you there is an EcoHitch trailer hitch that fits your 2024 Toyota RAV4 Prime, and the correct part number is the following:

- EcoHitch Hidden Trailer Hitch Receiver # EH97FR

expert reply by: Kyle S

0

Answer 1

I went ahead and contacted my tech at Torklift (the makers of EcoHitch) about the #EH97FR, and he confirmed that all M12 hardware will be torqued to 70 ft/lbs and all 1/4" hardware will be torqued to 8 ft/lbs. I went ahead and attached the step…

view full answer...

Answer 2

Yes, there is an EcoHitch available for your 2021 Toyota RAV4. It is the EcoHitch Hidden Trailer Hitch Receiver item #EH97FR. The EcoHitch has a completely hidden cross tube and the receiver is tucked in right beneath the lower bumper trim. I have…

view full answer...

Answer 3

The hitch receiver with the best ground clearance and least conspicuous presence, for your 2021 Toyota RAV4, is going to be the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" item #EH97FR. This hitch has a completely hidden…

view full answer...

Answer 4

I'd recommend the Curt Class III hitch you'd looked at, part #C13416, as Curt does a slightly better job than etrailer on their powder coat finish in my opinion. The Curt #C13416 and etrailer #e23ZR will have the same ground clearance, while…

view full answer...

Answer 5

The Curt #C13416and the etrailer #e23ZR Class 3 hitches would provide about the same amount of ground clearance, If I had to choose between them I'd go with the etrailer brand because it's manufactured in the US like the Curt, but also…

view full answer...

Answer 6

For your 2021 Toyota RAV4, the 2-inch hitch that has the highest rise we carry is the EcoHitch #EH97FR. This particular hitch has a ground clearance of 12 inches from the ground to the lowest edge of the receiver tube. If you are planning to tow with…

view full answer...

Answer 7

All of the hitches for your 2023 Toyota Highlander have the same basic design and will likely cause you to have to kick to either side of the receiver in order for the sensors to pick up your foot movement. Since these all have the same basic design…

view full answer...

Answer 8

Both the etrailer Hitch Receiver #e23ZR and the EcoHitch Hidden Trailer Hitch Receiver #EH97FR are Class III hitches with a 2" receiver. Both have a concealed cross tube so the only thing that is visible is the receiver tube once it is…

view full answer...

Answer 9

The Yakima HoldUp Bike Rack #Y02443 at it closest point will require 7" of clearance from the center of the hitch pin hole to the rear of your 2023 Toyota RAV4 Prime. So the Curt Trailer Hitch Receiver #C13416 you found having 5" from the…

view full answer...

Answer 10

I'd go with the Curt Class III hitch, part #C13416. Since you won't be towing, you won't need the huge 750 lb tongue weight capacity of the EcoHitch #EH97FR or the large expense. When installed both hitches would have a very similar…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does EcoHitch Trailer Hitch Fit 2024 Toyota RAV4 Prime

Product Page this Question was Asked From

Continue Researching