Base Plate Installation Instructions For A 2023 GMC Canyon AT4

Question

Question:

Is there specific instructions for a 2023 GMC Canyon AT4? The instructions for the Demco kit #9519361 are for a Chevrolet Colorado and the front grill in completely different. Thanks in advance

asked by: Chris C

1

Helpful Expert Reply:

I am sorry but we do not have any alternate instructions for the 2023 GMC Canyon AT4. This Demco base Plate # DM27YV (9519361) is fairly new and we have not had the chance to install one here at our shop yet.

If it helps, I was able to track down instructions for the Roadmaster base plate # RM98GR which is also for the 2023 GMC Canyon AT4. The design of the base plate is different from the Demco, but their instructions do show a GMC Canyon. They have some good pictures in there which you may find helpful. The same can be said for the Blue Ox brand equivalent # BLU85CR. You will find the instructions linked below. Hope this helps.

expert reply by: Jesse M

1

Answer 1

If your 1996 Jeep Grand Cherokee has no factory trailer wiring you'll need just two items to add a fully functional 7-way (female) trailer socket, basic 4-pole kit #118349 and 7-way kit #ETBC7. The 4-pole installation consists of plugging in…

view full answer...

Answer 2

That looks very much like an older Blue Ox base plate. We do offer the Replacement attachment tabs #BLU37XR which are made specifically for the Blue Ox base plate #BX1976 for a 2010 Jeep Liberty. That said, this is just an educated guess as to the…

view full answer...

Answer 3

Thank you for providing detailed information with part numbers. We can definitely get you set up. First, you will need to get the attachment tabs for your Blue Ox base Plate #BX3523. For that you can use the Replacement Attachment Tab Assembly…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a permanent…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 11

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

view full answer...

Answer 12

The instructions for the Demco Tabless Base Plate Kit #DM77YV are being added to page but I'll also send them to you separately. In the instructions they only show that the air dam needs a chunk cut out and that the shutters would remain. The…

view full answer...

Base Plate Installation Instructions For A 2023 GMC Canyon AT4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching