Recommended Front Hitch for a 2021 Ford F-350 Cab and Chassis

Question

Question:

Will this hitch fit a 2021 Ford F-350 chassis?

asked by: Tyrone S

0

Expert Reply:

Yes, it will. The Draw-Tite Front Hitch item # 65049 is confirmed to fit the cab and chassis models of the 2021 Ford F-350. It has a 2" receiver with a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. This hitch is custom fit and bolts to your Ford with included hardware.

I have linked an installation video below to help you get it set up.

expert reply by: Jerred H

0

Answer 1

Yes, this can be done. However, you need an additional 7-way harness #ETBC7 to activate the trailer's brakes as you go down the driveway. If you need a front hitch for your 2022 Ford F-350, I recommend the EcoHitch Hidden Front Mount Trailer…

view full answer...

Answer 2

I reached out to EcoHitch directly and confirmed that the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7904 will fit your 2020 Ford F-350 Diesel. EcoHitch informed me that they updated the EcoHitch #306-X7904 to work with both the gas and…

view full answer...

Answer 3

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 4

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 5

Yes, it will so long as your 2023 Ford F-350 doesn't have dual rear wheels. It won't work with the dually models since there is a larger front mounted auxiliary cooler that interferes with installation. The EcoHitch Hidden Front Hitch item…

view full answer...

Answer 6

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

view full answer...

Answer 7

Yes, the glass top on the Furrion 2-in-1 Range Oven #FR97KR is removable. The hinge for the glass has a small Phillips-head screw with a Phillips-head cap on it (pictured below) that can be removed to take the glass top off.

view full answer...

Answer 8

We have three different wheels available for your 2014 Thor Chateau 22E motorhome that will work but you need to verify your pilot hole size to determine the correct fit. I have no way of knowing what size you currently have. Dexstar Dual Wheel with…

view full answer...

Answer 9

For your 2008 Ford F-350 we have the Draw Tite hitch part #65049 which is a confirmed fit and has a tongue weight capacity of 500 lbs. The motorcycle carrier we offer that would work best is the Ultra Fab part #UF48-979033. Reason being it weighs…

view full answer...

Answer 10

I did some research and found instructions for installing the RanchHand Legend Grille Guard on your 2011 F-250 4x4. You can check out the attached photo that shows where a front hitch is mounted on a Ford F-250. You may find that the bottom bar on…

view full answer...

Answer 11

No, I can't recommend you use a bike rack cover like the #S24FR on a bike rack that is installed on a front hitch. You really can only use covers like this behind a very large vehicle where the air flow is basically blocked. Reason is the…

view full answer...

Answer 12

When installed, the EcoHitch #EH59FR front receiver will sit in the middle of the front bumper, between the tow hooks as shown in the photo I've provided for you. With the receiver sitting in the middle of the bumper, you won't need to worry…

view full answer...