Does Torklift Tie Down Lock Set TLS9700 Come with O-Rings

Question

Question:

Hi. Regarding product TLS9700: Does this product come with the o-ring Torklift tells me should be included, to take up the 1-1/4” gap on the lock shaft when using the locks on Torklift Fastguns? Please let me know. Thank you.

asked by: Christian

0

Expert Reply:

Yes, the TorkLift tie down lock set part # TLS9700 does come with everything that Torklift says it comes with including the O-ring you mentioned.

expert reply by: Jameson C

0

Answer 1

Unfortunately no, the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles #TLS9500 will all use the same key, however the TorkLift Tie Down Locks #TLS9700 will use a different set of keys as they are not able to be keyed alike.

view full answer...

Answer 2

The turn buckle locks we offer are the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Item #TLS9500 and TorkLift Tie Down Locks Item #TLS9700. Keep in mind TLS9700 is not compatible with the Talon R Series Tie Downs.

view full answer...

Answer 3

Yes, you can buy just the connection ends. Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End #PK12706. You can use these to repair your extension cord. I will attach a photo of the color codes to help you out.

view full answer...

Answer 4

To connect to the plug on your 2019 Ford F-250's truck bed camper, what you will do is use a 5th wheel/gooseneck wiring harness. The best location really depends on the camper, but most find positioning the harness towards the rear of the bed…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Does Torklift Tie Down Lock Set TLS9700 Come with O-Rings

Product Page this Question was Asked From

Continue Researching