How Many Andersen Camper Levelers # AM3604 Should be used for Tandem Axle Trailers

Question

Question:

Can I use just one leveler for a dual axle trailer?

asked by: Scott

1

Helpful Expert Reply:

I have confirmed with my contacts at Andersen, and for a tadem axle trailers one leveler # AM3604 should be used per axle for stability purposes. So for your application you would need 2 of these levelers.

This leveler provides from 1 inch to 4 inches of lift depending on the configuration needed. I have also included a short video review of this product for your reference.

expert reply by: Rachael H

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Jay, yes the CE Smith Multi Sport Kayak Trailer part #CE48870 would work great to transport a 2024 Old Town Bigwater EPDL 132. The bunks can be moved all the way together if needed and the angle is adjustable as well so you'd be able to fit…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 will fit the Roll N Lock tonneau cover with XT rails.

view full answer...

Answer 8

Hello Jason, I just looked up those Finn Golf Scooters those things are pretty sweet. We do have a potential solution for carrying a Finn Golf Scooter, but there are no Thule products I am aware of that will work for this. Your best option for this…

view full answer...

Answer 9

To install your Tekonsha Prodigy on your 2000 Toyota Tundra, you will need the Brake Controller Install Kit, part #ETBC7. The kit includes all necessary parts and hardware for installing a controller on your vehicle. We have some online resources you…

view full answer...

How Many Andersen Camper Levelers # AM3604 Should be used for Tandem Axle Trailers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching