Why Would Pace Edwards Tonneau Cover Pop Open on Highway

Question

Question:

I have had this cover installed now for 11 days. Over the last couple of days during my 60 mile commute to work, the cover is managing to slide open a couple of inches. It seems locked in place when I leave, but somehow during the drive it slides open. Any thoughts on what to look at as to why this would happen?

asked by: Rob W

0

Expert Reply:

This problem is due to the rails of your Pace Edwards tonneau not being tapered properly with the shims that came with it. Use the amount of shims that allows it to slightly catch when you go to open it almost to point you have to give it a little nudge to get it to open.

expert reply by: Jameson C

0

Answer 1

I do apologize for your cover not staying closed! There are a couple things that you can do to troubleshoot the latch of the Pace Edwards UltraGroove #311-KRDA24A55. Firstly, make sure that the pull strap needs to be used to close it instead of…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so you get the…

view full answer...

Answer 4

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Steve, thanks for the question, and we do indeed have the correct mounting panel for the Redarc Tow-Pro Liberty #RED24FR on your 2007 Toyota Tacoma. What you need is the following: - Mounting Panel for Redarc Tow-Pro Trailer Brake Controller…

view full answer...

Answer 7

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 8

Yes, here is a photo of our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98905 installed on a 2023 Toyota Tacoma.

view full answer...

Answer 9

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 10

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Why Would Pace Edwards Tonneau Cover Pop Open on Highway

Product Page this Question was Asked From

Continue Researching