Can CE Smith Trailer Wheel/Tire Spare Carrier # CE27201 Carry Wheel Vertically and Horizontally

Question

Question:

Can I use this to mount the tire vertically, or only horizontally?

asked by: Rebecca

0

Expert Reply:

With the CE Smith trailer wheel spare carrier part # CE27201 you can mount the wheel vertically or horizontally.

expert reply by: Jameson C

0

Answer 1

I have a different option for you, but there is not a version of the etrailer Spare Tire Carrier #e99045 you were looking at that works with 2" square tubing on your trailer. The closest straight mount carrier is going to be the CE Smith…

view full answer...

Answer 2

As you can see by the accompanying photos, the Stallion Stabilizer Jacks #288-01892-2 are very similar to the Atwood 82298 jacks. They are drop leg jacks with 7 inches of drop leg travel, an extended height of 22-1/4 inches, a lift capacity of 650…

view full answer...

Answer 3

Yes. The CE Smith Spare Tire Carrier - Lockable - Steel - 4-Lug and 5-Lug Wheels - 8-3/4" Long #CE27201 will fit your 5 on 5 bolt pattern wheels. There's also a version of this that comes with a padlock included with part #CE27202.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 9

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 10

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

view full answer...

Can CE Smith Trailer Wheel/Tire Spare Carrier # CE27201 Carry Wheel Vertically and Horizontally

Product Page this Question was Asked From

Continue Researching