Recommended Bike Rack for Two Jetson Bolt Pro E-bikes

Question

Question:

Hello! I need an advice. I have two Jetson Bolt Pro ebikes. I need a bike rack just for those two small ebikes. Thank you.

asked by: Lem

0

Expert Reply:

Thanks for the picture! With such small tires and short wheel base, I recommend the Saris Freedom Bike Rack for 2 Bikes item # SA4412B. This is a frame mount style bike rack that secures your bikes by either the frame or downtube using soft rubber cradles with cushioned straps. It has a 60 lbs per bike capacity and fits both 2" and 1-1/4" hitches.

expert reply by: Jerred H

0

Jetson Bolt Pro
(click to enlarge)

Answer 1

When the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches #KU74FR is in the folded position with the shank also folded upright, it measures 46-3/4" wide and 30-5/8" long (see attached photo). In case…

view full answer...

Answer 2

It will work with a 33" wheelbase but it isn't compatible with the 14" tires on your Jetson Bolt Pro bikes. The smallest size it can handle is 18". Additionally, the Kuat Transfer V2 Bike Rack item #KU74FR tops out…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 6

I have the perfect bike rack for your Electra Townie and for this I recommend the Saris Freedom 2 Bike Platform Rack part #SA4412B. The reason I recommend this bike rack over the Malone rack is because you don't need to use an adapter bar at all.…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 10

The Hollywood Racks Destination part #HLY66ZR that you referenced was designed for E-bikes like your Aventon Pace 500 that doesn't have a top crosstube. The frame clamp is pretty flexible in how it can attach to bike frames like yours and what…

view full answer...

Answer 11

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 12

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Recommended Bike Rack for Two Jetson Bolt Pro E-bikes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching