Replacement Prop Rod(s) For a Leer HF350M Tonneau Cover

Question

Question:

Will this replace the prop rod on my Leer HF350M?

asked by: Brennen L

0

Expert Reply:

No, the Replacement Prop Rod Assembly for Leer Tonneau Covers # LE54MR is not the correct fit for a Leer HF350M tonneau cover.

We currently have 3 replacement prop rods for Leer HF350M tonneau covers.

- Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE72RR (fits 631288, 631137, 631130, or 631201)
- Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE44MR (fits 631404)
- Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE94MR (631405)

You will either need to locate your cover part number to determine the correct replacement, or if you can provide me with the year/make/model and bed length of your truck, I can try and narrow it down for you.

expert reply by: Scott S

0

Answer 1

I can certainly point you in the right direction. Knowing the year make and model of your truck will be enough to narrow things down in this case. The Leer HF350M Tri-fold Tonneau For A 2019 Dodge Ram 1500 Crew Cab short bed is part 631298. This…

view full answer...

Answer 2

We don't have a way to get just the replacement ends for the prop rod assemblies. Only solution would be the complete rod like part #LE54MR.

view full answer...

Answer 3

What you're looking for, for your Leer Hard Tonneau Cover #LE44FR is the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers #LE94MR .

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Hi Jeremy; that's a good question and you'll actually need to go ahead and re-do the set up of your weight distribution system after adding the Timbren Rear Suspension Enhancement System #TDR1500DS to your 2019 Ram 1500. So it wouldn't…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Replacement Prop Rod(s) For a Leer HF350M Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching