SnapPads For A 2023 Entegra Vision 27A With Octagonal Jack Feet

Question

Question:

Which snap pads will fit the 2023 Entegra Vision 27a? Our pads on the stabilizers are octagon not round.

asked by: C R

0

Expert Reply:

For octagonal jack feet we currently only offer 10" pads with part # SP64FR84. I recommend measuring the diameter of your 2023 Entegra Vision 27A's jack feet to confirm fitment. If you find you have a different size then let me know and I'd be happy to look for a compatible fit.

expert reply by: Kevin C

0

Answer 1

The SnapPad Jack Pads, #SP54FR6, is for round feet pads at 9" in diameter. Please measure the diameter of the feet on your RV for fitment.

view full answer...

Answer 2

SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 Item #SP54FR6 can be taken off and on as needed so you won't have to keep replacing them every time you need to take them off.

view full answer...

Answer 3

The SnapPad Prime Jack Pads #SP84FR4 are specifically designed to fit the Power Gear Leveling Systems w/ 10" Round Concave Jack Feet on your 2014 Fleetwood Bounder 34B. The Pads #SC99MR Stromberg told you to use will not fit on your Bounder as…

view full answer...

Answer 4

It is difficult to say without more information. It is really going to depend on the power used by the fridge and the size of your batteries. For example, a fridge like the Everchill #324-000119 uses 11-amp hours of power, so it's going to…

view full answer...

Answer 5

Hey Bryan, thanks for reaching out! Your Reese Elite Series Hitch (discontinued part 30143) has a height range of 14-1/2" - 17" and is only able to secure to the OEM puck system on your 2021 Ford F-450 Super Duty, so we either need to get…

view full answer...

Answer 6

There's unfortunately not a guide to tell us the sizing of your trailer's jack pads so you'll want to measure and note the shape of each pad. I've run into numerous situations where the front and rear pads were either different sizes…

view full answer...

Answer 7

The Clearsource Ultra RV Water Filter System w/ VirusGuard #CS87FR weighs 34.125 lbs.

view full answer...

Answer 8

Hey Jeff, appreciate all the details you provided that was super helpful and we do have the MORryde cushioned pin box that is designed to replace a Lippert Rhino pin box. For the 17,695 lb GVWR you mentioned on the 2024 Brinkley Model Z 3610, what…

view full answer...

Answer 9

Thanks for reaching out, Brian! You'll need the Demco Autoslide Capture Plates #DM6171 to replace the capture plates that come on the Demco Hijacker for your 2024 Ram 3500. I recommend using one of the following Hijacker part numbers since they…

view full answer...

Answer 10

Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TL52SR will work perfect for your coach. These steps…

view full answer...

SnapPads For A 2023 Entegra Vision 27A With Octagonal Jack Feet

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching