SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet

Question

Question:

Will they fit 2021 Alliance 310RL 5th wheel

asked by: Mike M

1

Helpful Expert Reply:

The SnapPad Jack Pads, # SP54FR6, is for round feet pads at 9" in diameter. Please measure the diameter of the feet on your RV for fitment.

expert reply by: Michael R

1

Answer 1

For octagonal jack feet we currently only offer 10" pads with part #SP64FR84. I recommend measuring the diameter of your 2023 Entegra Vision 27A's jack feet to confirm fitment. If you find you have a different size then let me know…

view full answer...

Answer 2

We do offer the 9" snap pads like SnapPad Jack Pads part #SP54FR6. Depending on whether you have a 5th wheel or a motorhome there is a slight difference between them but I would be happy to help you select the correct ones if you provide…

view full answer...

Answer 3

It sounds like you have the Lippert Ground Control Auto Leveling Landing Gear 3.0 part #LC358590 and are looking for replacement front landing gear legs. For that you would want the part #LC305340 . The part number for the rear would be #LC344792…

view full answer...

Answer 4

For your 2021 Heartland Big Country that has the Lippert 6 Point Ground Control system the correct SnapPad set you'd need is the part #SP54FR6.

view full answer...

Answer 5

SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 Item #SP54FR6 can be taken off and on as needed so you won't have to keep replacing them every time you need to take them off.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 9

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Answer 10

The SnapPad Prime Jack Pads #SP84FR4 are specifically designed to fit the Power Gear Leveling Systems w/ 10" Round Concave Jack Feet on your 2014 Fleetwood Bounder 34B. The Pads #SC99MR Stromberg told you to use will not fit on your Bounder as…

view full answer...

Answer 11

Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TL52SR will work perfect for your coach. These steps…

view full answer...

Answer 12

Hey John, the Tire Linc One Control part #LC37VR would be a great option to allow you to monitor the Wrangler's tire pressure while it's being flat towed. This comes with a signal repeater to help with longer setups like what you have as…

view full answer...

SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet

Product Page this Question was Asked From

Continue Researching