Correct T-Slot Rail Upgrade for a Retrax Tonneau Cover on a 2017 Ford F-150 Raptor

Question

Question:

I have older retrax bed cover with out t slot rails for my 2017 ford raptor , I would like to swap the rails I have for tslot rails so I can mount Yakima overhaul racks to carry surf boards. What part number do I need?

asked by: Terry

0

Expert Reply:

I believe what you're looking for is the Replacement Side Rails for Retrax XR Series Hard Tonneau Covers # RTT-82381.

These rails can be added to the RetraxONE XR, PowertraxONE XR, RetraxPRO XR, and the PowertraxPRO XR tonneau covers to replace the standard rails and will provode the t-slot you're needing to mount the Yakima Overhaul.

expert reply by: Bryce D

0

Answer 1

I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails #RTT-82381 on the Cover #RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac #A54KG would be an option as this…

view full answer...

Answer 2

I reached out to my contact at Rhino-Rack and she reported that the Rhino-Rack #RRRLT600 legs will fit into RTC tonneau cover channels. Then you will need the Rhino-Rack #RRVA180B cross bars to fit into those legs.

view full answer...

Answer 3

Yes, the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers part #RRVA180B-RRRLT600 will absolutely work with the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails on your 2019 Ford F-250. It is actually designed…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 12

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Correct T-Slot Rail Upgrade for a Retrax Tonneau Cover on a 2017 Ford F-150 Raptor

Product Page this Question was Asked From

Continue Researching